Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you disassemble the engine of the Piaggio Ciao R2?

Model: Piaggio Ciao
Part: Engine

Video tutorial

In order to disassemble the engine of the Piaggio Ciao R2, you need to loosen the screws that secure the engine block to its housing, so that it is then possible to disconnect all the connectors and remove the tubes: once the engine block has been removed from its seat, it will be possible to proceed by loosening the screws that secure the cylinder to the top and remove it. In this way, it will be possible to access all the additional components inside the engine block, which can eventually be replaced by inserting new ones and finally closing the engine block.


Posted on 1 March 2025 by ScegliAuto


Related tutorials

How do you disassemble the engine of the Piaggio Ciao?
How do you disassemble the engine of the Piaggio Ciao?
Ciao To disassemble the engine of the Piaggio Ciao, you will need to loosen the screws that secure the block to its housing in the central lower part of t…
How do you disassemble the engine of the Piaggio Ciao?
How do you disassemble the engine of the Piaggio Ciao?
Ciao To disassemble the engine of the Piaggio Ciao, you need to loosen the screws that fix the engine block to its housing in the center of the frame, so …
How do you disassemble the engine of the Piaggio Ciao?
How do you disassemble the engine of the Piaggio Ciao?
Ciao To disassemble the engine of the Piaggio Ciao, you will need to loosen the screws that fix the component to its housing, located in the center of the…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos