Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Model: Piaggio Vespa Et4
Part: Seat

In this video, we can see how to open the seat of a Vespa Piaggio - any model - without having the key on hand. Maybe we forgot it inside, and to open it, we will only need a piece of metal wire. We insert it under the seat on one side and near the lock, pulling it out in an arc on the other side. We take the two ends of the metal wire and pull towards us until the wire manages to open the simple lock that closes the seat. This way, we can lift it and retrieve our key that was left inside the storage compartment.


Posted on 6 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the spark plug of the Piaggio Vespa 150 ET4
How to replace the spark plug of the Piaggio Vespa 150 ET4
Vespa Et4 The following steps will show us how to disassemble and replace the spark plug of the Piaggio Vespa 150 ET4 scooter engine. First of all, we put the …
Guide to replacing the starter motor of the Piaggio Vespa ET4 150
Guide to replacing the starter motor of the Piaggio Vespa ET4 150
Vespa Et4 Today's guide will show us how to disassemble and replace the starter motor of the Piaggio Vespa ET4 150 scooter, in simple steps. First, we put the …
How do you remove the carburetor from the Piaggio Vespa ET4 125?
How do you remove the carburetor from the Piaggio Vespa ET4 125?
Vespa Et4 In order to remove the carburetor of the Piaggio Vespa ET4 125, you need to open the underseat compartment so that you can loosen the screws that sec…

How to replace the engine oil in the Husqvarna Svartpilen 401?

In this tutorial we can see how to replace the engine oil in the Husqvarna Svartpilen 401, an extremely simple and fast operation. First of all, make sure that the engine is cold enough, then remove the lower cover and place a container underneath the motorcycle. Next, unscrew the bolts of the two drainage holes using both a 13mm socket wrench and an 18mm one, extract the two secondary filters and clean them from any dirt residue. At this point, all that remains is to open the main filter cap with an 8mm key, insert the replacement, reassemble everything and pour the necessary amount of oil through the appropriate upper hole.

Watch the video!


by ScegliAuto

More videos