Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the motor oil of the Piaggio Vespa GTS 250?

Model: Piaggio Vespa Gts 250
Part: Engine oil

Video tutorial

It will be possible to perform the oil change of the Piaggio Vespa GTS 250 by loosening the drain plug located in the central lower part of the vehicle: once the plug has been removed, it will be possible to collect all the used oil inside a container.

At this point, it will be possible to remove the oil filter located in this position: the new filter can now be inserted into its housing.

It will then be possible to top up with the necessary amount of oil by pouring it from the vent located on the right side of the motorcycle.


Posted on 9 June 2025 by ScegliAuto


Related tutorials

How to Remove the Engine from the Piaggio Vespa GTS 250 - 300
How to Remove the Engine from the Piaggio Vespa GTS 250 - 300
Vespa Gts 250 In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the…
How do you set the clock on the Piaggio Vespa GTS 250?
How do you set the clock on the Piaggio Vespa GTS 250?
Vespa Gts 250 In order to adjust the clock of the Piaggio Vespa GTS 250, you need to insert the ignition key into the ignition switch and turn it to turn on the in…
Replacing the spark plug on the Piaggio Vespa GTS 250
Replacing the spark plug on the Piaggio Vespa GTS 250
Vespa Gts 250 This guide will illustrate how to remove and replace the spark plug on the Piaggio Vespa GTS 250 scooter. First, place the scooter on its stand and o…

How to Dismantle the Engine of the Aprilia Leonardo?

To dismantle the engine of the Aprilia Leonardo, loosen the bolts securing it within its housing: once all the mounting bolts for the supports are loosened and the pipes and connectors are disconnected, you can remove the engine from its place. At this point, you can loosen the bolts securing the cylinder at the top of the bike, removing it along with the piston underneath. Once the connecting rod is freed from the crankshaft, you can open the engine block below and replace any internal parts if necessary.

Watch the video!


by ScegliAuto

More videos