Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
You can adjust the clock on the Piaggio Vespa GTS 300 by turning on the instrument panel and then navigating the menu that appears on the display by pulling the lever on the right of the handlebars to the left: you will need to select "Setting menu" by pulling the same lever to the right. Then, you can select the "Setting clock" option with the same lever and access the next screen where you can modify both the hours and minutes: once both have been adjusted, you can turn off the instrument panel by removing the key.

Posted on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Coolant in the Piaggio Vespa GTS 300 HPE
How to Change the Coolant in the Piaggio Vespa GTS 300 HPE
Vespa Gts 300 In this guide, you will learn how to bleed and top up the coolant in the Piaggio Vespa GTS 300 HPE, following the instructions below. First, place yo…
How to Change the Engine Oil and Oil Filter of the Piaggio Vespa GTS 300 HPE
How to Change the Engine Oil and Oil Filter of the Piaggio Vespa GTS 300 HPE
Vespa Gts 300 Today, we will discover the steps to carry out the routine maintenance service by replacing the engine oil and oil filter of the Piaggio Vespa GTS 30…
How to Remove the Front Headlight on a Piaggio Vespa GTS 300 - Super - HPE
How to Remove the Front Headlight on a Piaggio Vespa GTS 300 - Super - HPE
Vespa Gts 300 In this brief and simple guide, you will find instructions to remove and replace the front headlight of the Piaggio Vespa GTS 300 scooter, as well as…

How to Replace the Headlight Bulbs on the KTM RC 200?

As shown in this tutorial, replacing the headlight bulbs on the KTM RC 200 is an extremely simple and quick task. First, ensure that the key is not inserted for safety. Then, approach the headlight in question, locate the bulb holder, and turn it slightly counter-clockwise. Once done, disconnect the power connector, attach the new bulb, and reassemble everything. Avoid touching the glass of the replacement bulb directly with your bare hands, as any residues could cause it to overheat.

Watch the video!


by ScegliAuto

More videos