Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
These brief and simple steps will allow you to remove and replace the front light of the Piaggio Vespa PX 125. First, put down the centre stand and start removing the top plastic part of the handlebar by unscrewing the lower screws; then disconnect the electrical connector for the light (dipped beam and position), so you can remove it, as shown in the video. At this point, replace the bulbs or the entire optical unit, remounting it correctly on the handlebar; reattach the top cover with the speedometer, following the video tutorial to the end!

Posted on 12 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Handlebar Cover and Front Headlight on the Piaggio Vespa PX 125 - Lml Star 125
How to Remove the Handlebar Cover and Front Headlight on the Piaggio Vespa PX 125 - Lml Star 125
Vespa Px 125 This guide outlines the steps to remove and replace the handlebar cover and front headlight on the Piaggio Vespa PX 125 and Lml Star 125. First, plac…
Replacing the Front Headlamp Bulb on a Piaggio Vespa PX 125
Replacing the Front Headlamp Bulb on a Piaggio Vespa PX 125
Vespa Px 125 Below are the instructions for removing and replacing the front headlamp bulb on a Piaggio Vespa PX 125, as well as the PX 150 and PX 200. First, pla…
Replacement of the headlight bulb of the Piaggio Vespa PX 125
Replacement of the headlight bulb of the Piaggio Vespa PX 125
Vespa Px 125 In this guide, let's find out together how to disassemble and replace the low beam bulb of the Piaggio Vespa PX 125 headlight. First of all, put our …

How to Replace the Exhaust on the Honda CRF 450?

To replace the exhaust on the Honda CRF 450, loosen the screws that secure the side panel at the rear of the bike. Once this panel is removed, you will have access to the screws that secure the exhaust to the respective mounts, unscrewing the screws and the fixing ring. Once the exhaust is freed and removed from the remaining part of the exhaust pipe, you can insert the new one, securing it to the mounts and the exhaust pipe with its fixing ring. Finally, reattach the side panel to cover the exhaust.

Watch the video!


by ScegliAuto

More videos