Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Side Panels on Piaggio Fly

Model: Piaggio Fly
Part:

Video tutorial

Lift the seat and unscrew the two fixing screws. Unscrew the screw of the lower plate under the seat, then the screws of the battery cover.

Disconnect the two terminals of the battery, starting with the negative. After removing the battery, unscrew the rear light (two screws) and disconnect the various connectors.

Unscrew all the screws related to all the plastics between the seat and the footboard (a medium-small cross screwdriver is sufficient), and finally, you can move on to the side panels (all screws are clearly visible). It's a fun but really simple procedure that requires several steps but is within everyone's reach.


Updated on 8 April 2026 by ScegliAuto


Related tutorials

How to Remove the Fairing on the Piaggio Fly Scooter?
How to Remove the Fairing on the Piaggio Fly Scooter?
Fly In this tutorial, you will see how to remove the fairing on the Piaggio Fly scooter, a very simple and quick operation. First, unscrew the two screws…
Removing the Exhaust from the Piaggio Fly
Removing the Exhaust from the Piaggio Fly
Fly In this tutorial video, you will learn how to remove the exhaust from the Piaggio Fly scooter by following these simple steps. First, place the scoot…
Guide to Removing the Horn on a Piaggio Fly
Guide to Removing the Horn on a Piaggio Fly
Fly Today's steps will show you how to remove the front plastic cover and the horn from the Piaggio Fly scooter. First, place the scooter on its centre s…

How to Replace the Front Suspension on a Piaggio Vespa PX 150 - LML Star 150

In this short and simple guide, you will learn how to remove and replace the front suspension on a Piaggio Vespa PX 150, as well as on an LML Star 150. First, place the central stand and begin to unscrew the nuts securing the front wheel to remove it; then unscrew the suspension bolt, also removing the screw located at the top to detach it from the mudguard, as shown in the video. At this point, remove and replace the suspension with the new one of the correct type; then reassemble the front wheel, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos