Do it yourself
Frequently asked questions about cars and motorcycles
In today's video, you will see a very simple maintenance operation on your Vespa PX. Specifically, the removal of the centre stand; this is very useful if the part needs to be replaced or cleaned thoroughly. First, ensure the vehicle is in a stable position, for example on its stands. Then, gather a spring puller and a 10 mm spanner. Unscrew the screws in front of you. Next, unclip the retainers from their seats. Now pull out the stand and lubricate if necessary.

Updated on 16 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Vespa Px 125 Watch this video to see how to disassemble and replace the centre stand on the Piaggio Vespa PX 125, as well as the PX 200. First, lift your Vespa wi…
Vespa Px 125 In this brief guide, we will see the instructions that will allow us to disassemble and replace the flywheel of the Piaggio Vespa PX 125, 150, and 20…
Vespa Px 125 In today's video, you will see a very simple maintenance operation that you can perform independently on the Vespa PX. Specifically, how to replace t…

Replacing the Front Brake Pads on the Piaggio Vespa 50 LX

This guide will illustrate the instructions on how to remove and replace the front brake pads on the Piaggio Vespa 50 LX. First, place your scooter on the centre stand and start unscrewing the nuts securing the front wheel to remove it; then use pliers to remove the brake pad retaining clip, as shown in the video. At this point, remove the old pads, cleaning the caliper of dirt; press the caliper piston back to allow for the installation of the new pads (of excellent quality). Finally, reassemble the front wheel.

Watch the video!


by ScegliAuto

More videos