Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlamp of the Vespa PX

Model: Piaggio Vespa Px 125
Part: Headlight

This video is currently unavailable

In today's video, you will see a very simple maintenance operation that you can perform independently on the Vespa PX. Specifically, how to replace the front headlamp. First, ensure the vehicle has been stationary for a few hours and is positioned on the centre stand.

Start by using a cross-head screwdriver. Remove the two fixing screws located on either side of the headlamp.

Once done, you can detach the headlamp from the central body. Proceed with the replacement, and once the new unit is inserted, test its proper functioning before completing the job.


Updated on 3 August 2026 by ScegliAuto


Related tutorials

Replacing the Headlight Bulb of the Piaggio Vespa PX 125
Replacing the Headlight Bulb of the Piaggio Vespa PX 125
Vespa Px 125 In this guide, discover how to remove and replace the dipped beam bulb of the front headlight of the Piaggio Vespa PX 125. First, place your vehicle …
How to Replace the Front Light of the Piaggio Vespa PX 125
How to Replace the Front Light of the Piaggio Vespa PX 125
Vespa Px 125 These brief and simple steps will allow you to remove and replace the front light of the Piaggio Vespa PX 125. First, put down the centre stand and s…
How to Remove the Handlebar Cover and Front Headlight on the Piaggio Vespa PX 125 - Lml Star 125
How to Remove the Handlebar Cover and Front Headlight on the Piaggio Vespa PX 125 - Lml Star 125
Vespa Px 125 This guide outlines the steps to remove and replace the handlebar cover and front headlight on the Piaggio Vespa PX 125 and Lml Star 125. First, plac…

How to Replace the Belt and Rollers on the Piaggio Vespa GTS 300

This guide briefly outlines the steps to remove and replace the belt and rollers of the variator on the Piaggio Vespa GTS 300 scooter, following the instructions below. First, place your scooter on the centre stand and begin unscrewing the screws of the transmission cover to remove it; then unscrew the nut of the fan and that of the clutch bell, as shown in the video. At this point, remove the belt and then the variator, replacing the rollers found inside; install the new belt and reassemble the transmission!

Watch the video!


by ScegliAuto

More videos