Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Piaggio
    3. :
  3. Ciao
    4. : Replacing the Piaggio belt Hello, Yes, Garelli

Model: Piaggio Ciao
Part:
Replacing the Piaggio belt Hello, Yes, Garelli

Let's see today in this short and simple guide the instructions that will allow us to disassemble and replace the transmission belt of the Piaggio Ciao, but also of the Si and the Garelli. First we put the central stand and start by removing the left side cover, in order to access the transmission; then we go to unscrew the pulley screw to remove it, thus removing the old drive belt, as shown in the video. At this point we replace the belt with the new one, inserting it correctly; finally we carry out the adjustment of the belt!


Posted on 30 April 2024 by ScegliAuto

How do you disassemble the engine of the TM Racing EN 250?

To disassemble the engine of the TM Racing EN 250, you need to loosen the screws that fix the engine block to its housing: by loosening the screws that fix the engine to the frame, you will also be able to loosen those that fix the intake and exhaust pipes, then disconnect the connectors related to the sensors. In this way, you can proceed by removing the cylinder from the top and disconnecting the piston inside from the connecting rod; at this point, you can remove the connecting rod from the engine shaft and access the additional components at the base of the engine block.

Watch the video!


by ScegliAuto

More videos