Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Service the Piaggio Vespa 50 Primavera - Lx

Model: Piaggio Vespa 50 Lx
Part: Engine oil

Video tutorial

This guide shows you how to replace the engine oil and oil filter on the Piaggio Vespa 50 Primavera scooter, as well as the Lx, in simple and quick steps. First, place the central stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge to remove it and replace it with a new one, screwing it in and tightening it gently.

Finally, unscrew the filler cap and pour in the new engine oil (5W40).


Updated on 17 May 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil of the Piaggio Vespa 50 LX
Vespa 50 Lx Today, follow this brief and simple guide to perform the routine maintenance service by changing the engine oil of the Piaggio Vespa 50 LX. First, pl…
How to replace the air filter on a Piaggio Vespa LX 50?
How to replace the air filter on a Piaggio Vespa LX 50?
Vespa 50 Lx To replace the air filter on the Piaggio Vespa LX 50, loosen the screws that secure the side panel located at the rear left of the scooter. Under thi…
Replacing the Battery on Piaggio Vespa LX 50
Replacing the Battery on Piaggio Vespa LX 50
Vespa 50 Lx In this video tutorial, you will see how to remove and replace the battery on the Piaggio Vespa LX 50, as well as the LX 125. First, use a screwdrive…

How to Reset the Service Light on a Honda PCX 150 Scooter

In this tutorial, you will see how to reset the service light on a Honda PCX 150 scooter, a very simple and quick operation to be performed only after completing all scheduled maintenance tasks. First, insert the key and leave it in the initial position, then press and hold the "SET" button located on the right side of the dashboard while simultaneously turning on the ignition. Keep the button pressed until the service light goes out, then restart the ignition to verify that the operation was successful.

Watch the video!


by ScegliAuto

More videos