Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Battery from a Piaggio Liberty 125?

Model: Piaggio Liberty 125
Part: Battery

Video tutorial

This video tutorial shows how to replace the battery of a Piaggio Liberty 125 scooter. First, open the underseat compartment using the button located on the left side of the handlebar.

If the battery is completely dead, press the key to access the internal storage where you will find the manual release lever for the seat. Once the underseat compartment is open, you will find the battery compartment sealed with two screws; use a screwdriver to unscrew the screws and remove the cover.

The next step is to unscrew the battery terminal screws to extract the battery.


Updated on 24 May 2026 by ScegliAuto


Related tutorials

How to Set the Clock on a Piaggio Liberty 125
How to Set the Clock on a Piaggio Liberty 125
Liberty 125 Setting the clock on a Piaggio Liberty 125 is a straightforward task. In the attached video, we see the instrument panel and notice the Mode button, …
How to replace the air filter of the Piaggio Liberty 125 - 50
How to replace the air filter of the Piaggio Liberty 125 - 50
Liberty 125 Follow these steps to remove and replace the air filter cartridge of the Piaggio Liberty 125 scooter, as well as the 50. First, place your scooter on…
Replacing the Front Headlight Bulb on Piaggio Liberty 125
Replacing the Front Headlight Bulb on Piaggio Liberty 125
Liberty 125 In this video, we will see how to remove and replace the front headlight bulb on a Piaggio Liberty 125. First, we will remove the screws that hold th…

How to Replace the Clutch Discs on a Kawasaki Z1000?

Here are the brief instructions for removing and replacing the clutch discs on a Kawasaki Z1000 motorcycle. First, place the motorcycle on a stand and begin draining the engine oil by unscrewing the oil drain bolt located under the engine; then unscrew the fixing screws of the clutch cover to access the clutch, as shown in the video. At this point, unscrew the screws of the clutch pack, removing all the discs; replace and install the new original clutch discs, alternating the cork discs with the metal ones!

Watch the video!


by ScegliAuto

More videos