Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlamp Bulb on a Piaggio Vespa GTS 125

Model: Piaggio Vespa Gts 125
Part: Headlight bulb

Video tutorial

To replace the headlamp bulb on the Piaggio Vespa GTS 125, rotate the external mirrors counterclockwise to remove them from their housing. Once the mirrors are removed, you can detach the covers at their base by loosening the screws underneath.

When the screws at the front of the handlebars are also loosened, you can detach the front fairing by disconnecting the connector attached to the headlamp. This will allow you to remove the old bulb and replace it with a new one.


Updated on 26 May 2026 by ScegliAuto


Related tutorials

How to Replace the Front Indicator Bulb on the Piaggio Vespa GTS 125
How to Replace the Front Indicator Bulb on the Piaggio Vespa GTS 125
Vespa Gts 125 To replace the front indicator bulb on the Piaggio Vespa GTS 125, loosen the screw located at the bottom of the headlamp assembly. Once this screw is…
How to Adjust the Rear Shock Absorber of the Piaggio Vespa GTS 125
How to Adjust the Rear Shock Absorber of the Piaggio Vespa GTS 125
Vespa Gts 125 Follow these instructions to adjust the stiffness of the rear suspension on the Piaggio Vespa GTS 125 scooter, as well as the Vespa GTS 300. First, p…
How to Remove the Front Headlight of the Piaggio Vespa GTS 125?
How to Remove the Front Headlight of the Piaggio Vespa GTS 125?
Vespa Gts 125 To remove the front headlight of the Piaggio Vespa GTS 125, you need to loosen the screws that secure the front panel containing the headlight unit: …

How to Replace the Rear Brake Pads on a Derbi Senda 125?

To replace the rear brake pads on a Derbi Senda 125, loosen the nut that secures the central axle of the rear wheel so that it can be completely removed from its housing. Once the wheel is removed, you can slide out the pin that secures the pads inside the brake caliper and remove them from their housing. After the old pads have been removed, insert the new replacement parts, securing them with the pin. Finally, reinstall the rear wheel, positioning it at the end of the swingarm.

Watch the video!


by ScegliAuto

More videos