Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Indicator Bulb on the Piaggio Vespa GTS 125

Model: Piaggio Vespa Gts 125
Part: Headlight bulb

Video tutorial

To replace the front indicator bulb on the Piaggio Vespa GTS 125, loosen the screw located at the bottom of the headlamp assembly. Once this screw is loosened, you can pull the headlamp assembly out of its housing to disconnect the connector inside.

The bulb can now be disconnected, allowing you to connect the new one to the same connector. You can then insert it back into the headlamp assembly to ensure everything works correctly.


Updated on 19 September 2026 by ScegliAuto


Related tutorials

How to Adjust the Rear Shock Absorber of the Piaggio Vespa GTS 125
How to Adjust the Rear Shock Absorber of the Piaggio Vespa GTS 125
Vespa Gts 125 Follow these instructions to adjust the stiffness of the rear suspension on the Piaggio Vespa GTS 125 scooter, as well as the Vespa GTS 300. First, p…
How to Replace the Piston on a Piaggio Vespa GTS 125?
How to Replace the Piston on a Piaggio Vespa GTS 125?
Vespa Gts 125 To replace the piston on a Piaggio Vespa GTS 125, loosen the screws securing the valve cover to the engine block after removing all connectors and ma…
How to Replace the Headlamp Bulb on a Piaggio Vespa GTS 125
How to Replace the Headlamp Bulb on a Piaggio Vespa GTS 125
Vespa Gts 125 To replace the headlamp bulb on the Piaggio Vespa GTS 125, rotate the external mirrors counterclockwise to remove them from their housing. Once the m…

How to Change the Transmission Oil in the Honda SH 150i Scooter?

Changing the transmission oil in the Honda SH 150i scooter, as shown in this tutorial, is an extremely simple and quick operation. First, wait until the engine is cool enough, then locate the three bolts at the rear of the casing and position a container underneath them. Next, use a 12mm socket to remove the two inner bolts, allowing all the oil in the system to drain out, and then tighten the lower bolt. At this point, simply pour in the new oil through the upper hole, using a syringe and a thin tube if necessary.

Watch the video!


by ScegliAuto

More videos