Do it yourself
Frequently asked questions about cars and motorcycles

Model: Piaggio Ciao
Part:

In this tutorial, you will learn how to remove and replace the variator assembly on the Piaggio Ciao, Bravo, and Si. First, place the central stand and begin by removing the plastic cover of the variator and belt by unscrewing the securing screws (using a flat screwdriver). Then, tap on the collar of the central nut of the bell to open it, as shown in the video. At this point, unscrew the central nut to remove the variator, replacing it with the new one. Finally, reassemble everything by applying the reverse procedure!

Updated on 7 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Ciao Today's steps will show us how to disassemble and replace the clutch of the Piaggio Ciao, as well as the Si and the Bravo. First, we put the center s…
Ciao To replace the belt of the Piaggio Ciao, you need to loosen the screws that fix the transmission cover, which is located on the left side of the moto…
Ciao .. handlebars of the Piaggio Ciao, as well as the Bravo and Si. First, place the central stand and start by removing the screws of the front headlamp.. …

How to Replace the Key Battery on a BMW R1250GSA

To replace the key battery on your BMW R 1250 GSA, start by locating the opening slot on the key. Once you have found the slot, use a small screwdriver or a coin to carefully pry open the key. Find the existing battery and remove it carefully. Ensure you insert the new battery with the correct polarity. Close the key securely and check that it is properly sealed. Finally, test the key to ensure it works correctly. If in doubt, consult the owner's manual for detailed instructions.

Watch the video!


by ScegliAuto

More videos