Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The biggest issue with a scooter like the Piaggio Zip is that over time the plastics tend to fade. Let's see how to remedy this with a suitable product and the expertise of a professional who teaches us how to use it: the product is called Cora Kit and costs £18.01 on Amazon. First, we need to thoroughly degrease the part we are treating, cleaning it perfectly with a product that removes any silicone residues. Now apply the product, putting a few drops on the foam square covered by one of the yellow cloths provided and holding it between your thumb and index finger, apply it in one direction only. When you see it no longer colours, add another two drops. Then, with the microfibre cloth, spread it well to even out the colour and polish it. Let it rest for a couple of days in summer. In winter, it will need 8 to 10 days to fully crystallise, and it will protect the plastics for a long time.

Updated on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery of the Piaggio Zip
How to Replace the Battery of the Piaggio Zip
Zip Follow these instructions to remove and replace the battery of the Piaggio Zip scooter by following these simple steps. First, place your scooter on …
How to Change the Gear Oil on a Piaggio Zip
How to Change the Gear Oil on a Piaggio Zip
Zip Here are the brief instructions that will allow you to change the transmission oil on a Piaggio Zip scooter in simple and quick steps. First, place t…
Replacement of the front brake pads of the Piaggio Zip
Replacement of the front brake pads of the Piaggio Zip
Zip These short and simple steps will show us how to change the front brake pads of the Piaggio Zip scooter. First, we put the scooter on the center stan…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos