Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exhaust on a Vespa Primavera 150

Model: Piaggio Vespa 150 Primavera
Part: Exhaust muffler

Video tutorial

To replace the exhaust on a Vespa Primavera 150, loosen the bolt that secures the initial part of the exhaust, which connects it to the remaining part of the exhaust pipe. Once this bolt is removed, you can loosen the bolt at the top of the exhaust, which connects it to the appropriate support.

This way, the old exhaust can be completely removed and replaced with a new spare part. The new exhaust should then be positioned and secured with the corresponding screws at the rear and top.


Updated on 16 June 2026 by ScegliAuto


Related tutorials

Engine Oil and Oil Filter Replacement on Piaggio Vespa 150 Primavera
Engine Oil and Oil Filter Replacement on Piaggio Vespa 150 Primavera
Vespa 150 Primavera In this video tutorial, you will learn how to replace the engine oil and the oil filter while performing the regular maintenance service on a Piaggio…
How to Set the Time on a Piaggio Vespa 150 Primavera
How to Set the Time on a Piaggio Vespa 150 Primavera
Vespa 150 Primavera This brief guide shows how to change the time on the display of the Piaggio Vespa 150 Primavera instrument panel. First, place the scooter on its cen…
How to Replace the Battery in a Piaggio Vespa 150 Primavera Scooter
How to Replace the Battery in a Piaggio Vespa 150 Primavera Scooter
Vespa 150 Primavera In this tutorial, you will see how to replace the battery in a Piaggio Vespa 150 Primavera scooter, a very simple and quick operation. First, ensure …

How to change the transmission oil on the Honda PCX 150 scooter?

In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the engine is completely cold, then locate the three bolts at the end of the casing and position a container underneath them. Next, remove the two inner bolts using a 12 mm socket, clean them of any dirt, and allow all the oil in the system to drain out. At this point, tighten the lower bolt and, using a pump or syringe, add new oil through the upper hole.

Watch the video!


by ScegliAuto

More videos