Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Piaggio Vespa Pk 50
Part:

Follow this step-by-step guide to remove and replace the handlebar of the Piaggio Vespa PK 50. First, remove the plastic cover of the handlebar by unscrewing the screws located underneath it; then disconnect all the electrical connectors of the wiring harness, removing the speedometer cable as shown in the video. Next, disconnect the connectors found on the front shield's nose by removing the front headlamp; once all cables are removed, you can pull the handlebar upwards!

Updated on 23 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Dismantle, Clean, and Reassemble the Carburettor of the Piaggio Vespa PK 50
How to Dismantle, Clean, and Reassemble the Carburettor of the Piaggio Vespa PK 50
Vespa Pk 50 In this guide, we will see the instructions that will allow us to dismantle, clean, and reassemble the carburettor of the Piaggio Vespa PK 50. Place …
Dismantling the Bodywork Elements of the Piaggio Vespa PK 50
Dismantling the Bodywork Elements of the Piaggio Vespa PK 50
Vespa Pk 50 This guide provides instructions for dismantling all the bodywork elements of the Piaggio Vespa PK 50. First, place the central stand and start by re…
How to Adjust the Clutch Cable on Piaggio Vespa PK 50
How to Adjust the Clutch Cable on Piaggio Vespa PK 50
Vespa Pk 50 These brief and simple steps will show you how to adjust the clutch cable on the Piaggio Vespa PK 50. First, place the central stand and loosen the a…

What Does the V-Belt Light Indicate on a Yamaha NMAX Scooter and How to Remove It?

If the V-BELT light has illuminated on the instrument cluster of your Yamaha NMAX scooter, it means it is time to replace the drive belt as it has exceeded the relevant interval. You can entrust this maintenance task to your trusted workshop; the cost will not be particularly excessive. Once this is done, you can manually reset the light by following the procedure shown in this tutorial. First, turn on the instrument cluster, then repeatedly press the left button on the dashboard to reach the service interval in question. At this point, press and hold the right button once to initialise the reset, and a second time to complete it.

Watch the video!


by ScegliAuto

More videos