Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling the Bodywork Elements of the Piaggio Vespa PK 50

Model: Piaggio Vespa Pk 50

Video tutorial

This guide provides instructions for dismantling all the bodywork elements of the Piaggio Vespa PK 50. First, place the central stand and start by removing the engine cover and the spare wheel cover. Next, remove both the front and rear indicators by unscrewing the two fixing screws, as shown in the video.

At this point, remove the front and rear lamps using a cross-head screwdriver. Then, remove the instrument panel and the fuel tank, following the video tutorial to the end!


Updated on 20 July 2026 by ScegliAuto


Related tutorials

How to replace the footboard of the Piaggio Vespa PK 50
How to replace the footboard of the Piaggio Vespa PK 50
Vespa Pk 50 The instructions in this guide will show us how to disassemble and replace the footboard of the Piaggio Vespa PK 50 S. First, let's remove all the co…
How to Adjust the Clutch Cable on Piaggio Vespa PK 50
How to Adjust the Clutch Cable on Piaggio Vespa PK 50
Vespa Pk 50 These brief and simple steps will show you how to adjust the clutch cable on the Piaggio Vespa PK 50. First, place the central stand and loosen the a…
Removing the Handlebar of the Piaggio Vespa PK 50
Removing the Handlebar of the Piaggio Vespa PK 50
Vespa Pk 50 Follow this step-by-step guide to remove and replace the handlebar of the Piaggio Vespa PK 50. First, remove the plastic cover of the handlebar by un…

How to Replace the Front Headlamp Bulb on a Harley-Davidson 883

In this tutorial, see how to replace the front headlamp bulb on a Harley-Davidson 883, a straightforward and quick operation. First, ensure the key is not inserted, then remove the outer ring of the headlamp by unscrewing the relevant bolt. Next, separate the headlamp from the base, disconnect the power connector, and remove the large rubber cap. At this point, release the metal clip, extract the old bulb, and insert the replacement, avoiding direct contact with the glass. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos