Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Float from the Vespa Piaggio PX

Model: Piaggio Vespa Px 150
Part: Fuel pump

Video tutorial

Learn how to correctly remove the fuel sensor from the Piaggio Vespa PX Arcobaleno: there is a snap-in insert that needs to be rotated, using a screwdriver and a small hammer. It fits precisely, so lift it carefully to avoid damaging the fuel gauge rheostat while removing it from the tank and lifting the float, which must be rotated to exit the tank as it is shaped like an L. Otherwise, it won't pass through, and you risk leaving some parts inside the tank if you pull it towards you too forcefully.


Updated on 29 June 2026 by ScegliAuto


Related tutorials

How do you replace the exhaust pipe of the Piaggio Vespa PX 150?
How do you replace the exhaust pipe of the Piaggio Vespa PX 150?
Vespa Px 150 It will be possible to replace the exhaust of the Piaggio Vespa PX 150 by loosening the screws that secure the rear wheel covering panel on the left …
How to Replace the Rear Brake Shoes on a Piaggio Vespa PX 125?
How to Replace the Rear Brake Shoes on a Piaggio Vespa PX 125?
Vespa Px 150 To replace the rear brake shoes on a Piaggio Vespa PX 150, loosen the screws securing the exhaust cover. Once removed, loosen the screws securing the…
How to Replace the Front Mudguard on the Piaggio Vespa PX 150 - LML Star 150
How to Replace the Front Mudguard on the Piaggio Vespa PX 150 - LML Star 150
Vespa Px 150 This guide explains how to remove and replace the front mudguard on the Piaggio Vespa PX 150, as well as on the LML Star 150. First, place the centra…

How to Replace the Battery on a Triumph Bonneville T100

To replace the battery on a Triumph Bonneville T100, you need to completely remove the seat of the motorcycle to access the components located underneath: the battery can then be freed from the corresponding screws and power cables. Once the device is fully released, you can remove it from its housing and replace it with a new part: this can be secured with the appropriate screws, reconnecting the power cables and repositioning the seat.

Watch the video!


by ScegliAuto

More videos