|
Do it yourself
| |||
| ||||
|
Model: Piaggio Vespa Et4
To change the engine oil of the Piaggio Vespa ET4, loosen the bolt securing the oil drain plug located at the bottom centre of the scooter. Once the plug is removed, collect all the used oil in a suitably placed container. Next, remove the oil filter located next to the drain plug; insert the new filter, and then add the required amount of oil through the breather on the left side of the scooter.
Updated on 18 August 2026 by ScegliAuto
Video tutorial
Related tutorials
Vespa Et4
In this tutorial, you will learn how to change the engine oil on a Piaggio Vespa ET4 scooter, a simple and quick operation to perform every 12 months…
Vespa Et4
In this tutorial, you will see how to change the oil in a Piaggio Vespa ET4 125 scooter. For this operation, you will need a set of screwdrivers, pli…
Vespa Et4
To change the motor oil of a Piaggio Vespa 125 ET4, start by warming up the engine for a few minutes to fluidify the oil. Turn off the engine and pla…
|
Replacing the Headlight Bulb on the Yamaha Mio 125
This brief guide will show you how to remove and replace the headlight bulb on the Yamaha Mio 125 scooter in simple and quick steps. First, place the scooter on the centre stand and begin to remove the front headlight; to do this, unscrew the fastening screws located at the bottom and disconnect the electrical connector of the light found at the back, as illustrated in the video. At this point, remove and replace the bulb with a new one of the correct type and with the same fitting; finally, reassemble the front headlight with its front fairing! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.207
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
