Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the exhaust on a Piaggio Vespa GTS 125, loosen the screws that secure it to the corresponding supports at the rear of the scooter: these will be located at the top of the exhaust. Once these screws are loosened, proceed to unscrew the bolts securing the fixing ring, completely detach it, and remove the exhaust from its position; now you can insert the new exhaust, ensuring it is secured with the corresponding screws and fixed to the relevant supports. This way, you can check that everything functions correctly.

Updated on 19 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the exhaust pipe of the Piaggio Vespa GTS 125?
How do you replace the exhaust pipe of the Piaggio Vespa GTS 125?
Vespa Gts 125 The procedure for replacing the exhaust pipe on the Piaggio Vespa GTS 125 involves loosening the screws that secure it to the corresponding supports …
How do you disassemble the engine of the Piaggio Vespa GTS 125?
How do you disassemble the engine of the Piaggio Vespa GTS 125?
Vespa Gts 125 In order to disassemble the engine of the Piaggio Vespa GTS 125, you need to completely remove it from its housing: once these screws have been loose…
Replacing the Rear Brake Pads on the Piaggio Vespa GTS 125
Replacing the Rear Brake Pads on the Piaggio Vespa GTS 125
Vespa Gts 125 In this video tutorial, you will learn how to remove and replace the rear brake pads on the Piaggio Vespa GTS 125 scooter, as well as the GTS 300. Fi…

How to Replace the Clutch Cable on the Royal Enfield Classic 350

In this guide, you will learn how to remove and replace the clutch cable on the Royal Enfield Classic 350 motorcycle. First, place your bike on the centre stand and begin unscrewing the adjuster located above the clutch cover on the left side; then detach the cable. Next, remove the cable from the clutch lever, pulling it out along with the outer casing. Now, replace it with the new, correct type, connecting the cable to the clutch lever. Finally, adjust the clutch to set the disengagement.

Watch the video!


by ScegliAuto

More videos