Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Piaggio Vespa Px 125
Part:

To replace the stand on the Piaggio Vespa PX 125, loosen the screws that secure this component to its housing: these screws will be accessible from the upper side of the footrest area. Before loosening these screws, you must first loosen the nuts located at the bottom of the floor, so that the stand can be removed from its seat. At this point, it will be possible to reposition the new replacement part in its housing, inserting the appropriate screws and securing the part with the corresponding nuts to be placed underneath.

Updated on 23 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Centre Stand on Piaggio Vespa PX 125
How to Replace the Centre Stand on Piaggio Vespa PX 125
Vespa Px 125 Watch this video to see how to disassemble and replace the centre stand on the Piaggio Vespa PX 125, as well as the PX 200. First, lift your Vespa wi…
How to Change the Rear Wheel of the Piaggio Vespa PX 125 - Lml Star 125
How to Change the Rear Wheel of the Piaggio Vespa PX 125 - Lml Star 125
Vespa Px 125 In today's tutorial, you will see the procedure for removing and replacing the rear wheel of the Piaggio Vespa PX 125, as well as the Lml Star 125 an…
Replacing the Spark Plug of the Piaggio Vespa PX 125 - LML Star 125
Replacing the Spark Plug of the Piaggio Vespa PX 125 - LML Star 125
Vespa Px 125 Today, we will go through the instructions to remove and replace the spark plug of the Piaggio Vespa PX 125, as well as the LML Star 125. First, plac…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos