Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Clock on a Vespa GTS 300?

Model: Piaggio Vespa Gts 300
Part: Clock

Video tutorial

To adjust the clock on the Vespa GTS 300, turn on the instrument panel by rotating the key in the ignition switch: once the panel is on, press and hold the MODE button located on the right side of the handlebars. While holding this button, you will notice that the hours start to flash and can be changed with individual presses of the MODE button; after a few seconds, the minutes will start to flash and can be adjusted in the same manner.


Updated on 1 September 2026 by ScegliAuto


Related tutorials

How to Set the Clock on the Vespa GTS 300
How to Set the Clock on the Vespa GTS 300
Vespa Gts 300 To set the clock on the Vespa GTS 300, follow these steps: Turn on the Vespa and ensure the display is on and functioning. Look for the clock setting…
How to Set the Clock on a Piaggio Vespa GTS 300
How to Set the Clock on a Piaggio Vespa GTS 300
Vespa Gts 300 In this short and simple guide, you will learn how to adjust the clock and access the menu on the instrument panel of the Piaggio Vespa GTS 300. Firs…
How to Set the Clock on the Piaggio Vespa GTS 300?
How to Set the Clock on the Piaggio Vespa GTS 300?
Vespa Gts 300 To adjust the clock on the Piaggio Vespa GTS 300, you need to turn on the instrument panel and then navigate the menu that appears on the display by …

How to Replace the Rear Brake Pads on a Derbi Senda 125?

To replace the rear brake pads on a Derbi Senda 125, loosen the nut that secures the central axle of the rear wheel so that it can be completely removed from its housing. Once the wheel is removed, you can slide out the pin that secures the pads inside the brake caliper and remove them from their housing. After the old pads have been removed, insert the new replacement parts, securing them with the pin. Finally, reinstall the rear wheel, positioning it at the end of the swingarm.

Watch the video!


by ScegliAuto

More videos