Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Wheel from a Piaggio Beverly

Model: Piaggio Beverly 300
Part: Tires

Video tutorial

To remove the wheel from a Piaggio Beverly, follow these steps: Ensure the vehicle is stable and secure. Use a stand to lift the rear of the vehicle so that the wheel is off the ground.

Make sure the stand is positioned securely to avoid any accidents. Remove the centre cap of the wheel.

This cap covers the wheel axle. You can remove it using a screwdriver or a specific wheel tool.

Loosen the wheel fastening bolts. There are usually four or five bolts securing the wheel to the hub. Use an Allen key or a socket spanner to loosen the bolts.

Do not remove them completely at this stage, just loosen them. Lift the wheel from the hub. Once the bolts are loosened, gently lift the wheel from the hub. Hold it steady with both hands to prevent it from falling accidentally.

Remove the fastening bolts completely. Once the wheel is lifted from the hub, you can fully remove the fastening bolts.

Set the bolts aside in a safe place to avoid losing them. Remove the wheel from the vehicle.

Now you can gently pull the wheel from the hub and completely remove it from the vehicle.


Updated on 18 September 2026 by ScegliAuto


Related tutorials

Replacing the Spark Plug on a Piaggio Beverly 300ie
Replacing the Spark Plug on a Piaggio Beverly 300ie
Beverly 300 In this brief guide, we will cover the steps to remove and replace the spark plug on the Piaggio Beverly 300ie scooter. First, remove the left side p…
How to Remove the Fan and Variator on a Piaggio Beverly 300
How to Remove the Fan and Variator on a Piaggio Beverly 300
Beverly 300 In this guide, you will see the main instructions on how to remove and replace the fan, drive belt, and variator on the Piaggio Beverly 300 scooter. …
How to Remove the Transmission on a Piaggio Beverly 300
How to Remove the Transmission on a Piaggio Beverly 300
Beverly 300 This video shows how to remove the entire transmission on a Piaggio Beverly 300 scooter by following these simple steps. First, position the scooter …

How to Replace the Fork on a Peugeot Kisbee?

To replace the fork on a Peugeot Kisbee, loosen the bolts securing the front wheel to its housing: you will need to unscrew the bolts that hold the corresponding nut to remove the central axle of the wheel. Next, disconnect the brake caliper from the disc and proceed by unscrewing the bolts of the fairings that surround the fork: at this point, you can loosen the bolts that secure the fork to the steering, allowing you to insert the new one. This can then be secured to the steering, covered with the fairing, and the front wheel installed.

Watch the video!


by ScegliAuto

More videos