Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fitting the front luggage rack of the Vespa Primavera

Model: Piaggio Vespa 125 Primavera
Part:

Video tutorial

Let’s see how to fit the front luggage rack of the Vespa Primavera. Remove the badge with the Piaggio logo from the front shield and undo the bolt inside to remove the steering cover.

Dismantle the horn and the voltage regulator by unscrewing their screws, insert the mounting plate provided in the kit, and refit the two components in their position. Drill a hole in the steering cover, aligning it with the hole in the plate, put it back in place, and insert the long bolt with the rubber protection into the hole.

Fit the perforated upper plate in place of the logo and secure it with its bolt. You can now install the luggage rack and secure it with its two bolts.


Updated on 21 September 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plug on a Piaggio Vespa Primavera 125?
How to Replace the Spark Plug on a Piaggio Vespa Primavera 125?
Vespa 125 Primavera Good morning, today’s guide aims to replace the spark plug on your Piaggio Vespa Primavera 125. Start by removing the side panels of the scooter. Nex…
How to replace the rearview mirror on the Piaggio Vespa 125 Primavera?
How to replace the rearview mirror on the Piaggio Vespa 125 Primavera?
Vespa 125 Primavera To replace the rearview mirror on the Piaggio Vespa 125 Primavera, lift the rubber cap at the base of the mirror support: once this cap is lifted, gr…
How do you replace the front shock absorber of the Piaggio Vespa 125 Primavera?
How do you replace the front shock absorber of the Piaggio Vespa 125 Primavera?
Vespa 125 Primavera To replace the front shock absorber of the Piaggio Vespa 125 Primavera, you need to loosen the screws that secure the component to its housing: this …

How to Set the Clock on the Suzuki Burgman 125

To adjust the clock on the Suzuki Burgman 125, turn on the instrument panel by turning the ignition key in the ignition switch: once the panel is on, press and hold both buttons on either side of the display. This will cause the clock to flash, and you can change the hours by repeatedly pressing the button on the left of the instrument panel; to change the minutes, perform the same operation by pressing the button on the right. After adjustment, return to the initial screen to confirm the change.

Watch the video!


by ScegliAuto

More videos