Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video tutorial we will see how to disassemble and replace the tires of the Piaggio Vespa PX 125, but also of the LML Star 125, following the instructions below. First, we remove the wheel from the drum by unscrewing the five fixing nuts; then we remove the air and unscrew the rim nuts, removing the tire as shown in the video. At this point, if necessary, we also replace the inner tube, installing the tire and reassembling the rim; all that's left is to mount the wheel on the drum, fastening it with the five nuts in a crossed manner.

Posted on 6 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Rear Wheel of the Piaggio Vespa PX 125 - Lml Star 125
How to Change the Rear Wheel of the Piaggio Vespa PX 125 - Lml Star 125
Vespa Px 125 In today's tutorial, you will see the procedure for removing and replacing the rear wheel of the Piaggio Vespa PX 125, as well as the Lml Star 125 an…
How to Replace the Speedometer Cable on the Piaggio Vespa PX 125
How to Replace the Speedometer Cable on the Piaggio Vespa PX 125
Vespa Px 125 This guide explains how to remove and replace the speedometer drive cable on the Piaggio Vespa PX 125, as well as the PX 200 and PK 50. First, discon…
How to Replace the Gear Oil of the Piaggio Vespa PX 125
How to Replace the Gear Oil of the Piaggio Vespa PX 125
Vespa Px 125 To replace the gear oil of the Piaggio Vespa PX 125, loosen the drain plug of the oil reservoir located at the bottom of the transmission casing on t…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos