Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Piaggio Vespa Et4
Part:

In order to remove the flywheel of the Piaggio Vespa ET4, you need to loosen the screws that secure the casing located on the right side of the bike, just in front of the exhaust. Once this casing has been removed, you will be able to access the components below: here you will find the variator, which must be completely removed to access the underlying flywheel. The flywheel can then be removed from its seat by loosening the bolts, in order to insert the new replacement part; after the replacement, all the removed components can be reassembled, and their operation verified.

Posted on 9 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil of the Piaggio Vespa ET4?
How to Change the Engine Oil of the Piaggio Vespa ET4?
Vespa Et4 To change the engine oil of the Piaggio Vespa ET4, loosen the bolt securing the oil drain plug located at the bottom centre of the scooter. Once the …
How to Replace the Clock Battery on a Piaggio Vespa ET4?
How to Replace the Clock Battery on a Piaggio Vespa ET4?
Vespa Et4 To replace the clock battery on a Piaggio Vespa ET4, loosen the screws that secure the instrument panel to its housing: these will be visible after r…
How to Remove the Carburettor from a Piaggio Vespa ET4 125
How to Remove the Carburettor from a Piaggio Vespa ET4 125
Vespa Et4 To remove the carburettor from a Piaggio Vespa ET4 125, open the under-seat compartment to loosen the screws securing the internal cover of the drawe…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos