Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Gear Oil on a Piaggio Liberty 50 S?

Model: Piaggio Liberty 50
Part: Transmission fluid

Video tutorial

To change the gear oil on the Piaggio Liberty 50 S, loosen the drain plug located at the bottom of the transmission casing: once this plug is loosened, you can collect all the used oil in a suitably positioned container. After all the oil has drained out, close the drain plug of the gear oil so that you can top it up: you can insert the necessary amount of oil through the breather located at the top of the transmission casing.


Updated on 5 October 2026 by ScegliAuto


Related tutorials

How to Change the Transmission Oil of the Piaggio Liberty 50
How to Change the Transmission Oil of the Piaggio Liberty 50
Liberty 50 Let’s briefly review the instructions on how to replace the transmission oil of the Piaggio Liberty 50S scooter, following these simple steps. First,…
How to Replace Engine Oil and Oil Filter on a Piaggio Liberty
Liberty 50 Today, you will learn how to change the engine oil on your Piaggio Liberty 50. It is not a very complex task; just take some care, and you can do it …
How to Change the Engine Oil of the Piaggio Liberty 50
How to Change the Engine Oil of the Piaggio Liberty 50
Liberty 50 Changing the engine oil on the Piaggio Liberty 50 does not require any special tools; follow the steps below to perform the routine maintenance servi…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos