Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Ignition Switch on a Piaggio Vespa PX 125

Model: Piaggio Vespa Px 125
Part: Door lock

Video tutorial

To replace the ignition switch on a Piaggio Vespa PX 125, you need to loosen the screws that secure the internal trim panel of the front fairing: once this panel has been removed, you will be able to access the underlying components. Here, the switch can be freed from its securing screws and disconnected from the corresponding connector connected to the vehicle's battery: once the old switch has been completely removed, you can insert the new replacement part to check that everything functions correctly.


Updated on 6 October 2026 by ScegliAuto


Related tutorials

How to Replace the Ignition Switch on the Piaggio Vespa PX 125?
How to Replace the Ignition Switch on the Piaggio Vespa PX 125?
Vespa Px 125 To replace the ignition switch on the Piaggio Vespa PX 125, you need to remove the panel located at the front inside the scooter. Once this panel is …
Exhaust Replacement on Piaggio Vespa PX 125
Exhaust Replacement on Piaggio Vespa PX 125
Vespa Px 125 In today's tutorial, we will see how to remove the exhaust of a Piaggio Vespa PX 125, as well as the PX 150 and PX 200. First, remove the bolt securi…
How to Change the Rear Wheel of the Piaggio Vespa PX 125 - Lml Star 125
How to Change the Rear Wheel of the Piaggio Vespa PX 125 - Lml Star 125
Vespa Px 125 In today's tutorial, you will see the procedure for removing and replacing the rear wheel of the Piaggio Vespa PX 125, as well as the Lml Star 125 an…

How to Replace the Coolant in a Honda CB 500F

In this short and simple guide, you will find step-by-step instructions on how to drain and refill the coolant in a Honda CB 500F motorcycle. First, place your motorcycle on a stand and start by unscrewing the drain screw for the antifreeze, located on the water pump casing; let the fluid drain into a container for about ten minutes. Next, unscrew the radiator cap to allow the fluid to drain more quickly; finally, refill with new fluid suitable for your radiator, filling until you reach the maximum level mark!

Watch the video!


by ScegliAuto

More videos