Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front door panel of the Porsche Macan MK1.

Model: Porsche Macan MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Door trim panel

See other generations:
Video tutorial

Let's see how to remove the inner panel of a Porsche Macan door: insert a plastic lever at the end near the handle and pry it to release a series of clips. Once free, slide the panel towards the rear of the door to remove it. Slightly open the inner handle by inserting the lever to unlock the panel behind it: it has two front hooks and a rear clip that need to be removed to reveal a Torx T25 screw.

Now we can remove three more T25 screws: the screw behind the handle cover that has just been removed, the screw located at the other end of the panel, and the one behind the courtesy light on the lower edge of the door; here, to access it, you need to unlock the light from above with a plastic lever and disconnect the electrical connector.

After removing all three screws, the panel is only held by pressure clips; lift it vertically to disengage it from the edge of the door, and pull it away from the door.

Be very careful with the connectors: the large one for the module and the Bowden cables for the inner handle. Place it on a protected surface with the inner side facing down.


Posted on 3 January 2026 by ScegliAuto


Related tutorials

Replace Side Glass on Porsche Macan
Porsche Macan (2013-2024 / MK 1) Let's see how to replace the damaged side glass on a Porsche Macan. Remove the trim at the top of the panel, unscrew the screws inside with a screwdr…
How to replace the cabin air filter of the Porsche Macan
How to replace the cabin air filter of the Porsche Macan
Porsche Macan (2013-2024 / MK 1) In this new guide aimed at all of you who own a first series Porsche Macan, we will discover how to quickly and safely replace the engine air filter.…
Guide to Removing the Speaker Housing on the Porsche Macan
Porsche Macan (2013-2024 / MK 1) This guide provides the necessary instructions for removing the front door speaker on the first-generation Porsche Macan. First, open the front door …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos