Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Porsche
    3. : 924

How to Replace the Fuel Filter on a Porsche 924 S

Model: Porsche 924 MK 1 - Years 1976-1988
Part: Fuel filter

Below we will discover the steps that will allow us to remove and replace the fuel filter on a Porsche 924 S. First, lift the vehicle on the right side and locate the fuel filter; then disconnect the inlet and outlet pipes of the filter by unscrewing the bracket screw to remove the cartridge, as shown in the video. At this point, install the new fuel filter in the correct orientation, checking the condition of the pipes (replacing them if necessary); then verify the correct ignition of the engine!

Posted on 27 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Fuel Pump on a Porsche Panamera
How to Replace the Fuel Pump on a Porsche Panamera
Porsche Panamera (2009-2016 / 970, MK 1) Today, you will learn how to remove and replace the fuel pump on a Porsche Panamera by following the instructions below. First, open the rear doors a…
How to Replace the Fuel Pump on a Porsche Boxster
How to Replace the Fuel Pump on a Porsche Boxster
Porsche Boxster (1996-2004 / 986, MK 1) Today, let's look at the instructions to remove and replace the fuel pump on a Porsche Boxster in simple steps. First, open the hood of your car and …
Replacing the Fuel Pump on a Porsche 911 Carrera
Replacing the Fuel Pump on a Porsche 911 Carrera
Porsche 911 (1997-2005 / 996) Today, let's go through this brief and simple guide to remove and replace the fuel pump on a Porsche 911 Carrera. First, open the hood and start by r…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos