Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. RAM
    3. :
  3. Ram 1500
    4. : Tail light

RAM 1500 - Tail light

Tail Light RAM 1500 (2019-2026 / dt, mk 5)

RAM 1500 (2019-2026 / DT, MK 5)
How to Replace the Rear Light in the RAM 1500 Pickup?
In this tutorial, you will see how to remove and replace the rear light in the RAM 1500 pickup. For this simple and quick operation, you will need a Torx T25 …Read all…
Posted on 1 July 2026 by ScegliAuto
Cigarette lighter (2) Airbag (5) Alternator (1) Speaker (1) Shocks (4) Car stereo (4) Battery (6) Air vents (1) Control arm (1) Transmission (1) Spark plugs (2) Body (2) Key (16) V-belt (4) Onboard computer (2) Checks and maintenance (7) Dashboard (3) Side marker light (1) Headlight (8) Tail light (1) Fog lights (1) Air filter (7) Cabin air filter (8) Diesel fuel filter (1) Grille (2) Fuel injectors (2) Accessory kit (1) Light bulb (3) Side marker bulb (1) Headlight bulb (7) Tail light bulb (4) Interior dome light bulb (1) License plate light (2) (2) Handle (2) Starter motor (1) Transmission fluid (2) Engine oil (5) Clock (3) Door trim panel (5) Windshield (1) Front bumper (1) Rear bumper (2) Brake pads (6) Pump (1) Fuel pump (1) Push button (1) Power window switch (1) Heater core (1) Wheel (2) Fuse box (24) Seat (3) Axle shaft (1) Crankshaft position sensor (2) Suspension system (1) Side mirror (4) AdBlue warning light (2) Warning light – error code (11) Tire pressure warning light (1) Service warning light (22) Windshield wipers (2) Windshield washer nozzle (1) Valve (1) Blower motor (4)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos