Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. RAM
    3. :
  3. Ram 1500
    4. : License plate light

RAM 1500 - License plate light

RAM 1500 (2009-2019 / DS, DJ, MK 4)
How do I replace the Ram 1500 license plate light bulb?
In order to replace the license plate light bulb on the Ram 1500 you have to go to the lower part of the car, so that you can disconnect the connector …read all…
Posted on 23 September 2022 by ScegliAuto
RAM 1500 (2009-2019 / DS, DJ, MK 4)
How to install led license plate lights in RAM 1500
In today's video we see how to install the led license plate lights in the RAM 1500. The first step to take is the purchase of suitable bulbs to be inserted in …read all…
Posted on 8 April 2024 by ScegliAuto
Airbags (5) Alternator (1) Loudspeaker (1) Shock absorbers (4) Car stereo (4) Battery (6) Air Vents (1) Arm (1) Spark plugs (2) Bodywork (2) Key (13) V-belt (4) -board computer (9) Checks and maintenance (12) Dashboard (3) Side indicator light (1) Headlight (8) Tail light (1) Fog lights (1) Air filter (7) Cabin air filter (7) Diesel filter (1) Grille (2) Injectors (2) Accessory Kit (1) Light bulb (3) Side turn signal light bulb (1) Headlight bulb (5) Rear light bulb (4) Interior lights ceiling light bulb (1) License plate light (2) Third brake light (1) Handle (2) Starter motor (1) Gear oil (2) Engine oil (7) Door panel (5) Windshield (1) Front bumper (1) Rear bumper (2) Brake pads (6) Pump (1) Fuel pump (1) Push button (1) Window lift button (1) Instrument cluster (8) Passenger compartment heating radiator (1) Wheel (2) Fuse box (9) Seat (2) Drive shaft (1) Crankshaft RPM sensor (2) Suspensions (1) Outside rearview mirror (4) Windscreen wipers (2) Windshield washer nozzle (1) Valve (1) Interior blower (4)

How to reset the service in the Opel Antara?

As we can see in this tutorial, resetting the service in the Opel Antara is an extremely simple and fast operation. Before proceeding, of course, we must have completed all the planned maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel, not the engine. At this point, we release the accelerator and press it 3 consecutive times, always all the way. We then restart the panel to verify that the procedure has been carried out correctly.

Watch the video!


by ScegliAuto

More videos