Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. RAM
    3. :
  3. Ram 1500
    4. : Battery

RAM 1500 - Battery

RAM 1500 (2009-2019 / DS, DJ, MK 4)
How to replace the battery of a 2012 RAM 1500.
If you own a fourth-generation RAM 1500 (year 2012) and need to replace the vehicle's battery on your own, simply follow the steps described below. First, make …read all…
Posted on 6 September 2023 by ScegliAuto
RAM 1500 (2009-2019 / DS, DJ, MK 4)
How to replace battery on ram 1500
Let's see in this description how it is possible to replace the car battery, also helping us with the images of the video. First you need to open the bonnet, …read all…
Posted on 20 December 2022 by ScegliAuto
RAM 1500 (2009-2019 / DS, DJ, MK 4)
How do i replace the battery on the Dodge Ram 1500?
In order to replace the battery of the Dodge Ram 1500 you have to open the hood and locate the device, which is located in the upper right part of the engine …read all…
Posted on 19 August 2022 by ScegliAuto
RAM 1500 (2009-2019 / DS, DJ, MK 4)
How to replace the battery on the Dodge Ram 1500 MK4
In this short and simple guide we will see how to remove and replace the battery of the Dodge Ram 1500, fourth generation. First we open the engine hood to …read all…
Posted on 17 August 2022 by ScegliAuto
RAM 1500 (2019-2024 / MK 5, DT)
How do I replace the battery of the RAM 1500?
In order to replace the battery of the RAM 1500 you need to open the hood, so that you have access to the components inside the engine compartment: on the …read all…
Posted on 8 August 2022 by ScegliAuto
RAM 1500 (2009-2019 / DS, DJ, MK 4)
How to replace the battery on the RAM 1500 MK4
Let's see in this short video the main steps to disassemble and replace the battery of the RAM 1500 fourth series, following the instructions below. First of …read all…
Posted on 26 March 2024 by ScegliAuto
Airbags (5) Alternator (1) Loudspeaker (1) Shock absorbers (4) Car stereo (4) Battery (6) Air Vents (1) Arm (1) Spark plugs (2) Bodywork (2) Key (13) V-belt (4) -board computer (9) Checks and maintenance (12) Dashboard (3) Side indicator light (1) Headlight (8) Tail light (1) Fog lights (1) Air filter (7) Cabin air filter (7) Diesel filter (1) Grille (2) Injectors (2) Accessory Kit (1) Light bulb (3) Side turn signal light bulb (1) Headlight bulb (5) Rear light bulb (4) Interior lights ceiling light bulb (1) License plate light (2) Third brake light (1) Handle (2) Starter motor (1) Gear oil (2) Engine oil (7) Door panel (5) Windshield (1) Front bumper (1) Rear bumper (2) Brake pads (6) Pump (1) Fuel pump (1) Push button (1) Window lift button (1) Instrument cluster (8) Passenger compartment heating radiator (1) Wheel (2) Fuse box (9) Seat (2) Drive shaft (1) Crankshaft RPM sensor (2) Suspensions (1) Outside rearview mirror (4) Windscreen wipers (2) Windshield washer nozzle (1) Valve (1) Interior blower (4)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos