Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Battery in a 2012 RAM 1500

Model: RAM 1500 DS, MK 4, DJ - Years 2009-2019
Part: Battery

If you own a fourth-generation RAM 1500 (2012) and need to replace the vehicle's battery yourself, follow the steps below. First, remember to completely turn off your RAM 1500 for safety reasons. Then, lift the hood to access the battery and proceed to disconnect both terminals. Next, remove the security screws and take out the battery. Finally, install the new battery by reversing the order, and the procedure is successfully completed.

Updated on 16 August 2026 by ScegliAuto

Video tutorial

Related tutorials

RAM 1500 (2019-2026 / DT, MK 5) If you plan to work directly on one or more fuses of your new RAM 1500 fifth generation (year 2013) but do not know where they are located, pay atten…
RAM 1500 (2009-2019 / DS, MK 4, DJ) To replace the battery on a Dodge Ram 1500, open the hood and locate the battery, which is found in the upper right part of the engine compartment. R…
RAM 1500 (2009-2019 / DS, MK 4, DJ) In this short video, see the main steps to remove and replace the battery of the fourth generation RAM 1500, following the instructions below. First,…

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos