Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. RAM
  4. :
  5. Ram 1500
  6. : Headlight

RAM 1500 - Headlight

RAM 1500 (2002-2009 / DR, DC, DH, D1, MK 3, DM)
How to disassemble the front headlight and its bulbs of the Dodge RAM 1500.

Today we will see the instructions for disassembling and replacing the front headlight and its bulbs of the Dodge RAM 1500. First, we open the car's engine …read all…
Posted on 26 January 2024 by ScegliAuto
RAM 1500 (2009-2019 / DS, DJ, MK 4)
Disassembly of the front headlight of the Ram 1500.

Let's see how to proceed to disassemble the front headlights of the Ram 1500. We open the hood of the engine compartment and remove the six pressure inserts …read all…
Posted on 14 June 2023 by ScegliAuto
RAM 1500 (2009-2019 / DS, DJ, MK 4)
How to replace the headlight on the Ram 1500 [WORLD]

If we need to replace the headlight on this car model, the description below may be useful, where we will find all the steps and information necessary for a …read all…
Posted on 18 July 2022 by ScegliAuto
RAM 1500 (2002-2009 / DR, DC, DH, D1, MK 3, DM)
How to refit the headlights on the Dodge Ram 1500

Cime replace the front and rear light group on the Dodge Ram 1500. The two youtubers show us how simple it is: To replace the front light unit just remove …read all…
Posted on 19 June 2022 by ScegliAuto
RAM 1500 (2019-2024 / MK 5, DT)
How to install a headlight protective film on a Dodge Ram 1500

This video will demonstrate the installation of a headlight protective film on a Dodge Ram 1500. You will need to obtain a headlight protection kit, hairdryer, …read all…
Posted on 12 June 2022 by ScegliAuto
RAM 1500 (2002-2009 / DR, DC, DH, D1, MK 3, DM)
How to change the headlight of the Dodge Ram 1500

To remove the headlight of a Dodge Ram 1500, we start by opening the engine hood, on the central side of the headlight we unscrew a screw that we unscrew with …read all…
Posted on 12 May 2024 by ScegliAuto
RAM 1500 (2009-2019 / DS, DJ, MK 4)
How to replace the headlights on the RAM 1500 (2011-2017)

Let's see in this short guide how to remove and replace the headlights of the RAM 1500 fourth series, from 2011 to 2017. First we open the engine hood and …read all…
Posted on 25 March 2024 by ScegliAuto
RAM 1500 (2009-2019 / DS, DJ, MK 4)
How to customize the headlights of a RAM 1500.

In this video we will see how to customize the color of the headlights of a RAM 1500. To begin we open the hood; on the two sides we can find some screws, …read all…
Posted on 22 March 2024 by ScegliAuto

Airbags (5) Alternator (1) Loudspeaker (1) Shock absorbers (4) Car stereo (4) Battery (6) Air Vents (1) Arm (1) Spark plugs (2) Bodywork (2) Key (13) V-belt (4) -board computer (9) Checks and maintenance (12) Dashboard (3) Side indicator light (1) Headlight (8) Tail light (1) Fog lights (1) Air filter (7) Cabin air filter (7) Diesel filter (1) Grille (2) Injectors (2) Accessory Kit (1) Light bulb (3) Side turn signal light bulb (1) Headlight bulb (5) Rear light bulb (4) Interior lights ceiling light bulb (1) License plate light (2) Third brake light (1) Handle (2) Starter motor (1) Gear oil (2) Engine oil (7) Door panel (5) Windshield (1) Front bumper (1) Rear bumper (2) Brake pads (6) Pump (1) Fuel pump (1) Push button (1) Window lift button (1) Instrument cluster (8) Passenger compartment heating radiator (1) Wheel (2) Fuse box (9) Seat (2) Drive shaft (1) Crankshaft RPM sensor (2) Suspensions (1) Outside rearview mirror (4) Windscreen wipers (2) Windshield washer nozzle (1) Valve (1) Interior blower (4)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos