|
Do it yourself
| |||
| ||||
|
Video tutorial
To replace the front and rear headlight assemblies on a Dodge Ram 1500, follow these steps shown by the two YouTubers. To replace the front headlight assembly, remove three screws: two in the center and one on the side (which is a bit hidden), and the headlight will come out. Disconnect the plug that connects the assembly to the electrical system - do not forget to disconnect the negative terminal from the battery before working on electrical parts - now you can install the new ones. They range from $666.00 to $364.00 per pair on eBay, depending on the model you prefer. The blue wire highlighted in the video is the ground, which will connect to the black wires of the new headlight assembly. The red wire shown in the video will connect to the white wires. Now, for the rear assemblies: they come off easily and have only one connector. In fact, they cost a maximum of $100.00 per pair on eBay (unless you want to buy the LED ones, as the price goes up significantly).
Updated on 29 May 2026 by ScegliAuto
Related tutorials
RAM 1500
(2009-2019 /
DS, DJ, MK 4)
To replace the battery on a Dodge Ram 1500, open the hood and locate the battery, which is found in the upper right part of the engine compartment. R…
RAM 1500
(2002-2009 /
D1, DM, DC, MK 3, DR, DH)
In this short video, see how to remove and replace the cabin fan motor and its resistor on the Dodge RAM 1500. First, get inside the vehicle on the p…
RAM 1500
(1994-2001 /
MK 2, BR, BE)
Replace the starter motor on the Dodge RAM 1500 by following the instructions below. First, open the hood and disconnect the battery. Then, lift the …
Other guides you may be interested in
|
How to Open the Fuel Filler Flap in the Hyundai i30?
In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.056
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
