Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Fan and Resistor on a Dodge RAM 1500

Model: RAM 1500 D1, DM, DC, MK 3, DR, DH - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Blower motor

See other generations:
Video tutorial

In this short video, see how to remove and replace the cabin fan motor and its resistor on the Dodge RAM 1500. First, get inside the vehicle on the passenger side and locate the cabin fan, which is found under the glove compartment. Then, use a Phillips screwdriver and an 8 mm socket wrench to remove the screws for the resistor and the cabin fan, disconnecting the electrical connectors to take them out, as shown in the video.

Finally, replace and reassemble everything by following the reverse procedure!


Updated on 7 May 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Fan in a RAM 1500?
How to Replace the Cabin Fan in a RAM 1500?
RAM 1500 (1994-2001 / MK 2, BR, BE) To replace the cabin fan in a RAM 1500, move the carpet located at the bottom of the glove compartment on the passenger side: this will allow access …
How to Replace the Cabin Fan in a RAM 1500 Pickup?
How to Replace the Cabin Fan in a RAM 1500 Pickup?
RAM 1500 (2009-2019 / DS, DJ, MK 4) In this tutorial, you will see how to replace the cabin fan in a RAM 1500 pickup, a very simple and quick operation. First, ensure that the key is no…
How to Replace the Crankshaft Position Sensor on a Dodge RAM 1500
How to Replace the Crankshaft Position Sensor on a Dodge RAM 1500
RAM 1500 (1994-2001 / MK 2, BR, BE) In today's video tutorial, we will see how to disassemble and replace the crankshaft position sensor on a Dodge RAM 1500. First, open the hood and st…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos