Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight on the Ram 1500 [WORLD]

Model: RAM 1500 DS, DJ, MK 4 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight

See other generations:
Video tutorial

If you need to replace the front headlight on this vehicle model, the description below will provide all the steps and necessary information for a proper replacement. First, open the access panel located at the front of the inner fender.

Through this opening, you can access the back of the headlight. Next, lift the hood and remove the plastic panel above the headlight assembly, then locate and unscrew the screws securing it. After that, pull the headlight assembly towards you to extract it, then disconnect the connectors at the back.

Take the new headlight assembly, position it, and then screw in the screws and reconnect the electrical connectors.


Updated on 3 June 2026 by ScegliAuto


Related tutorials

How to Remove the Front Headlight and Its Bulbs on the Dodge RAM 1500
How to Remove the Front Headlight and Its Bulbs on the Dodge RAM 1500
RAM 1500 (2002-2009 / D1, DM, DC, MK 3, DR, DH) Today, let's go through the instructions for removing and replacing the front headlight and its bulbs on the Dodge RAM 1500. First, open the hood of …
How to Replace the Rear Light in the RAM 1500 Pickup?
How to Replace the Rear Light in the RAM 1500 Pickup?
RAM 1500 (2019-2026 / MK 5, DT) In this tutorial, you will see how to remove and replace the rear light in the RAM 1500 pickup. For this simple and quick operation, you will need a …
How to replace the headlight bulb of the 2015 RAM 1500.
How to replace the headlight bulb of the 2015 RAM 1500.
RAM 1500 (2009-2019 / DS, DJ, MK 4) To replace the headlight bulb on a 2015 RAM 1500 vehicle, we need to remove the headlight assembly. Open the front hood and unscrew the nuts that sec…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos