Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

RAM 1500 -

RAM 1500 (2009-2019 / ds, mk 4, dj)

RAM 1500 (2009-2019 / DS, MK 4, DJ)
How to replace the third brake light bulb on the RAM 1500
Replacing the third brake light bulb on a Ram 1500 is a very quick operation to perform independently. Unscrew the two screws on the headlight and proceed with …Read all…
Posted on 8 July 2024 by ScegliAuto
RAM 1500 (2009-2019 / DS, MK 4, DJ)
How to Replace the Third Brake Light on a Dodge Ram
To change the bulb of the third brake light on a Dodge Ram, start by removing the 4 screws that hold the light panel in place. Lift the panel from the bottom …Read all…
Posted on 5 August 2026 by ScegliAuto
Cigarette lighter (2) Airbag (5) Alternator (1) Speaker (1) Shocks (4) Car stereo (4) Battery (6) Air vents (1) Control arm (1) Transmission (1) Spark plugs (2) Body (2) Key (16) V-belt (4) Onboard computer (2) Checks and maintenance (7) Dashboard (3) Side marker light (1) Headlight (8) Tail light (1) Fog lights (1) Air filter (7) Cabin air filter (8) Diesel fuel filter (1) Grille (2) Fuel injectors (2) Accessory kit (1) Light bulb (3) Side marker bulb (1) Headlight bulb (7) Tail light bulb (4) Interior dome light bulb (1) License plate light (2) (2) Handle (2) Starter motor (1) Transmission fluid (2) Engine oil (5) Clock (3) Door trim panel (5) Windshield (1) Front bumper (1) Rear bumper (2) Brake pads (6) Pump (1) Fuel pump (1) Push button (1) Power window switch (1) Heater core (1) Wheel (2) Fuse box (24) Seat (3) Axle shaft (1) Crankshaft position sensor (2) Suspension system (1) Side mirror (4) AdBlue warning light (2) Warning light – error code (11) Tire pressure warning light (1) Service warning light (22) Windshield wipers (2) Windshield washer nozzle (1) Valve (1) Blower motor (4)

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos