Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Radio in the Dodge RAM?

Model: RAM 1500 D1, DM, DC, MK 3, DR, DH - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Car stereo

See other generations:
Video tutorial

The need to remove the radio from your vehicle, whether it is the mentioned model or any other, does not always depend on a malfunction to repair, but also on the desire to replace it with a more recent model. In the video guide available, you will see how to perform this task: Start by unscrewing the screws at the bottom of the trim.

Then, continue removing the remaining perimeter part of the trim using a plastic trim tool. Finally, unscrew the locking pins of the radio, pull it out of its housing, and disconnect the rear connector of the power cables.


Updated on 21 October 2026 by ScegliAuto


Related tutorials

RAM 1500 (2002-2009 / D1, DM, DC, MK 3, DR, DH) This video shows the location of the fuse boxes in the 2003 Dodge Ram 1500. In addition to the location of the fuse boxes, the video displays the dia…
RAM 1500 (2019-2026 / MK 5, DT) Today's steps will show you how to reset the factory radio and multimedia system of the Dodge RAM 1500. First, get in the vehicle and turn on the ign…
RAM 1500 (2009-2019 / DS, DJ, MK 4) The fuse layout, or rather the fuse box, of Dodge Ram vehicles, specifically the 2016 Dodge Ram 1500, is an electrical diagram that allows you to eas…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos