Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install the tablet mount for the RAM Promaster

Model: RAM Promaster MK 1 - Years 2014-2022

In this guide, we will see the instructions that will allow us to install the tablet holder on the RAM Promaster, as well as on the Fiat Ducato. First, we get on board the vehicle and start by removing the factory radio, using the appropriate extraction tools and disconnecting the electrical connector on the back; then we install the plastic clips on the top, where the tablet holder will be placed, as shown in the video. At this point, we properly install the tablet holder on the dashboard, reassembling the multimedia system last!

Posted on 27 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Install the Tablet Mount for the Fiat Ducato on a Ram Promaster
How to Install the Tablet Mount for the Fiat Ducato on a Ram Promaster
RAM Promaster (2023-2026 / MK 2) In this video, you can see how to install the tablet mount from a Fiat Ducato on a Ram Promaster. First, remove the factory radio, which can be done …
How to install the front fog lights of the RAM Promaster
How to install the front fog lights of the RAM Promaster
RAM Promaster (2014-2022 / MK 1) In this guide, we will see the main instructions that will allow us to install the front fog lights on the RAM Promaster, but also on the Fiat Ducato…
How to Replace the Factory Radio in a Ram Promaster
How to Replace the Factory Radio in a Ram Promaster
RAM Promaster (2014-2022 / MK 1) In this video tutorial, you will see the steps to remove and replace the factory radio in a Ram Promaster. First, get inside the vehicle and start re…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos