Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear seat of the RAM 1500

Model: RAM 1500 MK 5, DT - Years 2019-2026
Part: Seat

Today we will explain how to remove the rear seat on a RAM 1500 vehicle. We open the door on the passenger side rear and lift the seat in order to access the side and bottom bolts. Using a socket wrench with an 18 insert, we unscrew the bolts located on the carpet blocking the plastic supports that hold the seat after removing the nuts using a 12 star nut we remove the socket located on the side. Lift and tilt the seat forward to unhook it. Perform the same operation on the other two seats to remove the entire bench.

Posted on 13 March 2025 by ScegliAuto

Video tutorial

Related tutorials

Removal of the rear seats of the RAM 1500
Removal of the rear seats of the RAM 1500
RAM 1500 (2019-2026 / MK 5, DT) Today we will see the main steps that will allow us to disassemble the rear seats of the RAM 1500, following the instructions below. First we access …
How to disassemble the rear seat on Ram 1500?
How to disassemble the rear seat on Ram 1500?
RAM 1500 (2009-2019 / MK 4, DJ, DS) If it is necessary to remove the rear seat from the car, proceed as follows: open the rear hatch and overturn the seat cushion (side 2/3), there are …
Where are the fuses of the new RAM 1500
Where are the fuses of the new RAM 1500
RAM 1500 (2019-2026 / MK 5, DT) If you intend to intervene directly on one or more fuses of your new RAM 1500 fifth series (year 2013) but you don't know where they are then you jus…

How to Remove the Front Shock Absorber on a Peugeot 406

How to remove the front shock absorber on a Peugeot 406? The first step is to lift the bonnet and secure it with the prop rod. Use a socket wrench to unscrew the shock absorber mounting bolts (engine bay), lift the car on a column lift and remove the front wheel. Unscrew the shock absorber mounting bolts at the wheel hub (detach the brake line clips with a screwdriver). Unscrew the bolts on the side, then remove the shock absorber from its housing (place a support under the bar). Compare the old part with the new one and prepare for installation. Fit the new shock absorber to the car, working in reverse order.

Watch the video!


by ScegliAuto

More videos