Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. RAM
    3. :
  3. 1500
    4. : Where are the fuses of the new RAM 1500

RAM 1500 - Video tutorial

Model: RAM 1500 DT, MK 5 - Years 2019-2024
Part: Fuse box
Operation: Where are the fuses of the new RAM 1500

If you intend to intervene directly on one or more fuses of your new RAM 1500 fifth series (year 2013) but you don't know where they are then you just need to pay attention to the following indications. First, get inside the vehicle and make sure it is turned off and parked safely. Immediately afterwards, locate the plastic cover located under the steering wheel and remove it with your own hands. Finally, locate the fuses in front of you and you're done. Before working on them, completely disconnect the battery of your RAM 1500.


Posted on 2 June 2023 by ScegliAuto

    Frequently Asked Questions

    • Ram 1500 2009-2019 - Where is the fuse box located in the Dodge RAM 1500? Read Answer
    • Ram 1500 2002-2009 - What's wrong with the Dodge RAM 1500 fuse box? Read Answer
    • Ram 1500 1994-2001 - How to fix the faulty fuse box on the Dodge RAM 1500? Read Answer
    • Ram 1500 2002-2009 - What problems does the RAM 1500 fuse box have? Read Answer
    • Ram 1500 2009-2019 - What to do if the RAM 1500 cigarette lighter fuse fails? Read Answer
    • Ram 1500 2019-2026 - How to recognize a problem with the fuse box in the RAM 1500 pick-up? Read Answer
    • Ram 1500 2019-2026 - What can be the problem with the fuse box on the Dodge Ram 1500? Read Answer
    • Ram 1500 2009-2019 - What problems does the RAM 1500 fuse box have? Read Answer
    • Ram 1500 2019-2026 - How to fix a fuse box problem on the Dodge RAM 1500? Read Answer
    • Ram 1500 2019-2026 - What to do in case of malfunction of the fuse box in the RAM 1500 pick-up? Read Answer

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos