Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the License Plate Bulb on a RAM 2500?

Model: RAM 2500 MK 4, D2, DS, DJ - Years 2009-2019
Part: License plate light

To replace the license plate light bulb on the RAM 2500, access the inside of the rear bumper to disconnect the connector attached to the license plate bulb. Once the connector is detached, remove the old bulb from its socket to insert a new one. Reconnect the connector to the socket, then place it back into its housing and perform the same operation on the other side. After installation, check that the bulbs are functioning correctly.

Updated on 9 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Headlight Bulb on a Dodge Ram 2500
How to Replace the Rear Headlight Bulb on a Dodge Ram 2500
RAM 2500 (2009-2019 / MK 4, D2, DS, DJ) To replace the rear headlight bulb on a Dodge Ram 2500, lower the tailgate to access the screws that secure the headlight. You can then pull the head…
How to Replace the Headlight Bulb on a Dodge Ram 2500
How to Replace the Headlight Bulb on a Dodge Ram 2500
RAM 2500 (2009-2019 / MK 4, D2, DS, DJ) To replace the headlight bulb on a Dodge Ram 2500, first remove the grille located in the center of the vehicle, just above the bumper. Once the gril…
How to Remove the Spare Tire from the Dodge Ram 2500 Mk3
How to Remove the Spare Tire from the Dodge Ram 2500 Mk3
RAM 2500 (2002-2009 / DM, DC, D1, DH, MK 3, DR) This guide shows how to remove the spare tire from the Dodge Ram 2500 Mk3. To perform this operation, check if the tool kit in the vehicle includes e…

Other guides you may be interested in

How to Replace the Remote Battery for the Volvo XC40?

In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything.

Watch the video!


by ScegliAuto

More videos