Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service in the RAM 3500 pick-up?

Model: RAM 3500 DJ, MK 4, DS - Years 2009-2019
Part: Service warning light

In this tutorial we can see how to reset the service in the RAM 3500 pick-up, a very simple and fast operation. Obviously, before doing this, it will be necessary to complete all the maintenance work required. To reset, we start by inserting the key and turning on the instrument panel, not the engine. Subsequently, we press the brake pedal fully two consecutive times and, within 10 seconds, we slowly press the accelerator pedal, also fully. At this point we can turn off the ignition and check that the procedure was successful at the next ignition.

Posted on 8 March 2022 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil service in the RAM 3500 pick-up?
How to reset the oil service in the RAM 3500 pick-up?
RAM 3500 (2009-2019 / DJ, MK 4, DS) In this video we can see how to reset the oil service in the RAM 3500 pick-up, a very simple and fast operation, to be followed only after having cha…
How to remove the rear light in the RAM 3500 pick-up?
How to remove the rear light in the RAM 3500 pick-up?
RAM 3500 (2019-2026 / DT, MK 5) As we can see in this tutorial, disassembling the rear light in the RAM 3500 pickup is very simple. We can do this in case we need to replace a fault…
How to replace the cabin filter in the RAM 3500 pick-up?
How to replace the cabin filter in the RAM 3500 pick-up?
RAM 3500 (2009-2019 / DJ, MK 4, DS) Replacing the cabin air filter, in the RAM 3500 pick-up, is a very simple and fast operation, let's see how to proceed in this tutorial. The filter i…

Other guides you may be interested in

How to Replace the Front Bumper of an Opel Corsa

The process is straightforward and quick; just follow this simple guide. Start by unscrewing the screws located under the wheel arch, specifically those facing the front bumper, on both sides. Next, remove the screws securing the bumper to the lower panel of your vehicle. Lift the bonnet and remove the screws located on the top of the bumper. Once these screws are removed, you can easily pull out the bumper and disconnect the plugs at the back.

Watch the video!


by ScegliAuto

More videos