Do it yourself
Frequently asked questions about cars and motorcycles

Complete Dashboard Removal

Model: RAM 1500 DM, D1, DH, DC, MK 3, DR - Years 2002-2009
Part: Dashboard

This video shows you how to completely remove your dashboard and change the air vent outlets. First, remove the entire dashboard until you can see the body when you enter the car. Then, remove every bracket or panel from the dashboard so you can completely take out the black plastic unit that directs air to each of your ventilation outlets. Once removed, you can work on it as needed to correct or improve the settings made by the manufacturer.

Updated on 10 February 2026 by ScegliAuto

Video tutorial

Related tutorials

RAM 1500 (2019-2026 / DT, MK 5) Knowing the exact location of the fuse box in your RAM 1500 (latest model) is very important as it allows anyone to restore the proper functioning of…
RAM 1500 (2002-2009 / DM, D1, DH, DC, MK 3, DR) The first symptom related to damage to the cabin heater radiator is fogging of the windshield: fluid leaking from the radiator causes condensation to…
RAM 1500 (2009-2019 / DS, MK 4, DJ) Lift the vehicle on a shop lift (or on jack stands, if necessary) and locate the oil pan. Remove the drain plug to let the used oil flow out into a c…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos