Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the Dodge Ram Promaster key remote control battery

Model: RAM Promaster MK 1 - Years 2014-2022
Part: Key

We see below the instructions necessary to remove and replace the remote control battery of the Dodge Ram Promaster key. First of all we take our remote control in hand and start to unscrew the screw that we find on the key slot with a slotted screwdriver; then we pry the sides of the remote control to open it in two parts, removing the battery, as shown in the video. At this point we replace the battery with the new one, of the right type (in this case a 3V CR 2032); insert it in the correct direction and assemble the two remote control shells again!

Posted on 5 May 2022 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the glow plugs in the RAM Promaster?
How do you replace the glow plugs in the RAM Promaster?
RAM Promaster (2014-2022 / MK 1) To replace the glow plugs of the RAM Promaster, you will need to open the hood in order to access the components inside the engine compartment: here …
Where are the fuses located in the RAM Promaster?
Where are the fuses located in the RAM Promaster?
RAM Promaster (2014-2022 / MK 1) The fuse boxes of the RAM Promaster are responsible for containing all the fuses installed in the vehicle. It will be possible to find the first of t…
How to replace your Ram Promaster windshield wipers
How to replace your Ram Promaster windshield wipers
RAM Promaster (2014-2022 / MK 1) Let's see in this guide how to disassemble and replace the front wipers of the Ram Promaster, following the instructions below. First of all let's mo…

Other guides you may be interested in

How to Remove the Right Front Door Panel on an Opel Mokka

To remove the right front door panel on an Opel Mokka, follow these steps: disconnect the battery terminals located in the engine bay, then use a screwdriver to remove the screws from the upper door opening lever and the screws in the handle. Next, remove the covering plastic near the lever. Unscrew the remaining screws on the door panel and detach the retaining clips. Finally, pull the panel away with your hands and unclip it from the door (disconnect the power wiring and the release cable). Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos