Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Speakers in the Ram Promaster City

Model: RAM Promaster City MK 1 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Speaker

Video tutorial

In this video tutorial, learn how to remove and replace the front speakers in the Ram Promaster City by following the instructions below. First, open the front door and start removing the door panel; to do this, unscrew the fastening screws and disconnect the electrical connector of the switch panel, also disconnecting the handle cable, as shown in the video.

Next, unscrew the speaker mounting screws to remove it and replace it with the new one, disconnecting the electrical connector on the back; apply the reverse procedure for reassembly!


Updated on 21 May 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter in a RAM Promaster City
How to Replace the Cabin Air Filter in a RAM Promaster City
RAM Promaster City (2015-2022 / MK 1) If the cabin air filter in your RAM Promaster City (2015-2022) is excessively worn and you want to know how to replace it, just follow these steps. F…
Fuse Box Location and Diagram for RAM Promaster City
Fuse Box Location and Diagram for RAM Promaster City
RAM Promaster City (2015-2022 / MK 1) The front electrical distribution unit of the 2017 RAM Promaster City is located on the right side of the engine compartment, next to the battery. To…
Fuse Diagram for a RAM Promaster City
Fuse Diagram for a RAM Promaster City
RAM Promaster City (2015-2022 / MK 1) This brief video guide shows all the fuse diagrams for a RAM Promaster City, a model produced from 2015 to 2022. These diagrams accurately indicate t…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos