Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the driver's door panel from a 2007 Dodge Ram 3500

Model: RAM 3500 MK 4, DS, DJ - Years 2009-2019
Part: Car door

The video shows how to remove the driver's door panel from a 2007 Dodge Ram 3500. It is an operation that you can do yourself without resorting to the mechanic in case you want to access the side mirror or want to replace the speaker. Remove the four Phillips screws. Next, remove the 10mm bolt, with a ratcheting socket, holding the door release handle. At this point, just grab the handle and carefully lift the panel to be able to remove it from the door. At this point, disconnect the two connectors by pressing on their catches.

Posted on 22 July 2022 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the fuel filter for the Dodge RAM 3500 6.7L.
Replacement of the fuel filter for the Dodge RAM 3500 6.7L.
RAM 3500 (2019-2026 / DT, MK 5) Today we will discover the main steps that will allow us to disassemble and replace the fuel filter of the Dodge RAM 3500 6.7L. First, we lift the ve…
How to replace the rearview mirror on the Dodge Ram 3500?
How to replace the rearview mirror on the Dodge Ram 3500?
RAM 3500 (2009-2019 / MK 4, DS, DJ) In order to replace the rear-view mirror of the Dodge Ram 3500 you must first remove the door panel: to do this you will need to loosen the bolts loc…
How to replace the air filter on the Dodge Ram 3500?
How to replace the air filter on the Dodge Ram 3500?
RAM 3500 (2009-2019 / MK 4, DS, DJ) In order to replace the air filter on the Dodge Ram 3500 you need to open the hood and locate the air filter box, which is located on the left side o…

Other guides you may be interested in

How to Replace the Number Plate Bulb on Citroen C3

To replace the number plate bulb on a Citroen C3, use a screwdriver or plastic lever to remove the light cover (plastic housing) located in the rear bumper of the car. Once the light cover is removed, extract the bulb holder (using your hands), then disconnect the bulb from it. Fit the new LED bulb (same size and voltage) into the holder, then refit the light cover into the tailgate metal by pressing until the clips lock automatically. Test the correct operation of the previously installed bulb.

Watch the video!


by ScegliAuto

More videos